The Challenge Of Teaching Elderly Drivers

According to statistics older people who drive cars above the age of 80 have a higher risk factor per mile driven than any other age group. As we get older our reaction times grow longer and physical weakness makes controlling a vehicle all the more difficult. Older drivers tend to make short local journeys from time to time to carry out basic tasks like shopping or visiting friends. As they have little practise in longer journeys or in heavy or fast moving traffic they are increasingly ill equipped to deal with the modern driving environment. Owing to the majority of their journeys being on quieter roads over short distances older drivers are more risk to themselves than to other road users.

Owing to frail physical condition they are much less likely to survive even only a minor crash. The highest third party risk is to any passengers being carried in the vehicle at the time. The highest risk seems to be to younger passengers such as grandchildren.

Teaching older drivers can be one of the most inspiring and challenging things an instructor can do. Having taught people over the age of eighty I have found it to be a very rewarding experience. To meet such determined and friendly people can be a boost to the working day.

The statistics do match real life experience however. An elderly driver will handle the streets around their home reasonably well until something unexpected happens and then those slow reactions really begin to show. The overall attitude of elderly drivers is to blame the other person and then make up as many excuses as possible as to why the incident occurred. This must be handled diplomatically and respectfully as they do not like to feel condescended to by an instructor younger than themselves.

As the journey moves away from the home location the standard of drive deteriorates rapidly, showing that they are driving from memory. When the time comes to deal with new information vehicle control and road position become more haphazard and we really do begin to rely on luck to stay safe. Large multi lane roundabouts which require reading of signs and complex lane markings are well beyond the limits of the elderly driver. Add to that the high speed movement of other vehicles and the driver becomes overloaded and seeks to ignore their surroundings only looking at the section of road in front of the car. Elderly female drivers can become easily panicked which may require use of the dual controls to calm the situation down. The instructor must not hesitate to seize control of the vehicle to avoid an accident.

We must be compassionate when considering taking a licence from an elderly driver. When you take away a licence you take away everything that the licence allows then to do, cutting down their personal freedom and leaving them house bound in some cases. As they cannot provide for their basic needs without a vehicle they become reliant on outside service providers.

A form of graduated licence may be the answer with restrictions on the carrying of passengers and distance travelled from a home address. Instructors must do all they can to preserve the self sufficiency of older drivers whilst maintaining a high level of road safety.

Cheap Wedding Limos And Limousine Services MA

When preparing a wedding, event planning is easier said than done. Not everything is about the magic and romance, it is also about out of town guests arriving in the unfamiliar area and being unsure on where to go, what to do and where to stay, which can lead to confused and frustrated guests. Thus, it’s good to include more information on the unexpected things that can happen. Weather, traffic, alternative route if need it be.

Wedding events often take place at several locations, and we’ll take care of how you and your guests get from place to place relax and stress-free.

Transportation might not be on your mind when planning a wedding, Having black sedans wedding services from the airport to the hotels they are staying in, a bridal limousine, groom car service, wedding shuttle service for your guest our services Boston Wedding Limousine assure you of a great result.

Our limousine wedding specialists, professional chauffeurs who are properly attired in a black suit and tie know well on a rainy day to have a clear umbrella is better so they are hardly noticeable in the photo. the best Wedding Limousine in Boston at competitive prices willing to go the extra mile to ensure your day is an exceptional one.

At Boston Wedding Limousine we know the importance of such a day we make sure that the wedding plans are executed in the way it should be.

You may be thinking what services goes into the wedding planning for help we offer the following services that go well and it is as in the program and is as follows:

A special deal on your bachelor or bachelorette limousine party, a discounted sedan ride to and from Boston Logan Airport for your honeymoon getaway, transportation for your out of state, guests, an hourly rate for limo service, rehearsal dinner and bridal shower.

We do not overbook our Boston Wedding Limousine services you can expect the best.

We also undertake all nature of precautions so that you get the best of what affordable wedding limousines is all about on your Special day.

Besides passing a pre-employment drug screening, all Boston Northeastern Limousine drivers participate in an in-depth and structured two-week training program focusing on Boston geographic knowledge, New England landmark locations and professional conduct, defensive driving and crisis management, safety awareness and preventive mechanical maintenance.

It is also a guarantee that you will never be charged more than what you settled for your Wedding Limousine. We only complete the credit card transaction at the conclusion of the trip, and, the only amount processed is the one you sign up for. We offer lower prices than other Limousine companies but never lowers our quality of service.

We made it easy to request a wedding Limousine services MA. Just call us and make your reservation.

mistake and changes happen while planning a wedding event, overwhelmed, stressed out with details you can call us and make the necessary changes anytime, a friendly phone call will be made to you from our office to go thru everything for any last minute changes.

We have the ability to handle a group of any size. To make the process smooth the driver can be of help to help coordinate your transportation needs so that you can concentrate on other important aspects.

When it Comes to Being Tire Smart, Play Your Part

Tire manufacturers and retailers nationwide are constantly working to educate motorists about proper tire care and maintenance. The Rubber Manufacturers Association does their part by providing tire retailers, auto dealers and automotive repair shops with free “Be Tire Smart, Play Your PART” brochures and other materials. The RMA also sponsors National Tire Safety Week, using that opportunity to promote tire care through advertising, promotions, free tire pressure checks and conducting media outreach.

Playing your “PART” when it comes to tire care focuses on the four key tire factors for motorists to monitor and maintain: Pressure, Alignment, Rotation, and Tread.


For starters, proper tire inflation pressure is vitally important; in fact, a number of studies have proven that under-inflated tires can lead to tire failure. But what is the proper amount of tire inflation? To find the answer, you should be able to find a vehicle manufacturer’s label affixed inside the glove box door, on the edge of the vehicle door, inside the “B” pillar door post, or even the fuel-filler door. It is also listed in the owner’s manual. The label will look something like this:

The following are some recommended tips to ensure that your tires are properly inflated:

– Check the pressure in all four tires every month, and it’s always a good idea to check your tires before embarking on a long trip

– It’s important to remember that your tires should be cool before you check the inflation pressure. Driving even one mile to the nearest service station will heat up your tires and cause an increase in inflation pressure, giving you an inaccurate reading. So check and record your tire pressure before you drive to get air so that you add the correct amount of inflation pressure when you get to the air pump.

– Don’t forget to check the air in your spare tire, and keep in mind that many of today’s more popular spare tires require higher inflation pressure.

– Every few days take a walk around your vehicle and visually inspect your tires for objects, such as glass or nails, embedded in the tread. Pay special attention to the sidewalls and make sure there are no bulges, gouges or cuts.


Nothing will wear away tread faster than poor wheel alignment and your tire dealer will be happy to perform the necessary wheel alignment to help you maximize your tire’s tread life. Wheel alignment is usually just needed on front wheels, but it’s recommended that front-wheel-drive vehicles, and vehicles with independent rear suspension, have all four wheels aligned. Your owner’s manual provides manufacturer’s recommendations for frequency of alignment, but pay attention to your vehicle’s ride characteristics. If you notice unusual left or right pulling or drifting that’s a clear indication that an alignment may be necessary. Finally, keep in mind that unbalanced tires also contribute to irregular tread wear and/or tire vibration, so have your tire retailer check tire balance periodically.


Regular tire rotation can go a long way to prevent irregular tire wear. Your tire dealer, the tire manufacturer, or your vehicle owner’s manual will have suggestions for the appropriate rotation pattern for your vehicle, as well as a recommended tire rotation timetable. Generally, it’s a good idea to rotate tires every 5,000-8,000 miles.

Before you rotate your tires make sure you’ve attended to any alignment or out-of-balance conditions as mentioned previously, and make sure your tires are at proper inflation levels after rotation.


Last, but certainly not least, closely monitoring tread wear will provide you with a clear indication of when your tires must be replaced. Not only does worn tread affect traction, but more importantly, your vehicle is more susceptible to hydroplaning on wet roads with reduced tread. A quick and easy way to measure your tread will only cost a penny. Simply place a penny into a tread groove and as long as Abe Lincoln’s head is inside the tread, you’ve got the proper amount of tread. But if you see the top of Honest Abe’s head, it’s time to pay a visit to your tire retailer. Also, today’s modern tires feature tread “wear bars,” narrow strips of smooth rubber that will appear across the tread when worn down to 2/32 of an inch, another indication, once visible, that tire replacement is on the agenda.

Keep an eye on your tires and they’ll take care of you. Get into the habit whenever you gas up to visually inspect your tires for signs of uneven wear, low pressure, and visit your tire dealer at the first sign of trouble.

Automotive AC Machines

As any mechanic knows, the ability to offer a comprehensive service to customers, being able to offer repairs and care for all aspects of a motor vehicle maintenance program is key to being able to retain customers. Air Conditioning is more or less standard across all models these days, and while in the past, AC maintenance was a highly skilled and niche market, it is now an essential side of the business and key to any workshop’s continued success.

In order to ensure that refrigerant is recovered properly from a car’s air conditioning system during servicing, a workshop must use an automotive AC machine. These devices prevent the release through venting of CFC gases. EPA guidelines require that when a car is being serviced, the Freon, or CFC12 that is used as the coolant should be collected and recycled in order that it is not released into the environment where it can potentially damage the ozone layer.

The refrigerant used in most motor vehicle air conditioning systems is based on chlorofluorocarbons, which have been linked with causing damage to the ozone layer, and as such, the control of these substances is of particular concern to the environmental protection agency. Whenever a car air conditioning system undergoes maintenance, proper care must be taken to protect the environment from the release of CFCs, and this is best done by using automotive AC Machines.

By reusing Freon gas rather than allowing it to be vented into the atmosphere, the environment is protected. However, when the refrigerant is collected from a car’s air conditioning it can be contaminated with water, oil and any of the other liquids that are used in cars. By using automotive AC machines, it is possible to process the refrigerant and remove any of the other fluids from it, allowing it to be reused, either in the same system as it has been drained from, or alternatively, in another car altogether.

There are a whole range of different refrigerant recovery machines on the market to suit all types of workshop, from small operations through to large commercial garages that deal with many different types of car, and need to be able to offer a complete service to clients.

Choosing the right automotive AC machines for your needs can be a daunting task, and too many people simply opt for the cheapest model available, rather than making an informed decision about the best product for their needs. EPA requirements aside, the most important factor when choosing the correct automotive AC machine for your business, is the capacity of the machine to deal with the range of vehicles that you currently work on. You need to choose a machine that can connect easily with all the different types of car that your workshop deals with, and which has enough capacity to recover and treat the refrigerant left in the system to remove any impurities.

Basic automotive AC machines such as the Pro Set Oiless Portable Recovery Recycle Unit are flexible enough to reprocess coolant from a fairly wide range of sources, remove any contaminating oils and other liquids, and release the Freon in perfect condition for reuse.

There are other machines in a similar price bracket that are reliable enough for every day use, and yet still compact enough not to require a vast amount of space in your workshop. Automotive AC Machines such as the Inficon Vortex refrigerant recovery machine are ideally suited to occasional use, and are very compact.

If offering AC repairs and servicing is key to your business, then having the right tools for the job is essential. Getting it right at the beginning when you choose an AC coolant recovery machine often means choosing a model from the Cool Tech range. These robust and highly regarded specialist tools are at the centre of any serious AC shop, and thanks to their efficiency and great value for money, will pay for themselves over and over again.